收藏本站
5.2.5 LCD/Keypad Sample Programs Showing TCP/IP Features
The following sample programs, found in the TCPIP subdirectory in
SAMPLES/LCD_Keypad/122x32_1x7 , are demonstrate the features of the LCD/key-
pad module connected to the backplane. Remember to configure the IP address, netmask,
and gateway as indicated in the sample programs.
? MBOXDEMO.C —This program implements a web server that allows Web e-mail mes-
sages to be entered that are then shown on the LCD display. The keypad allows you to
scroll within messages, flip to other e-mails, mark messages as read, and delete e-mails.
When a new e-mail arrives, an LED turns on, and turns off once the message has been
marked as read. A log of all e-mail actions is kept, and can be displayed in the Web
browser. All current e-mails can also be read with the Web browser.
When using MBOXDEMO.C , connect the Smart Star CPU Card and a PC (or other device
with a Web Browser) to an Ethernet. If you connect the PC and the CPU Card directly,
be sure to use a crossover Ethernet cable; straight-through Ethernet cables and a hub
may be used instead.
? TCP_RESPOND.C —This program and TCP_SEND.C are executed on two separate sin-
gle-board computers to demonstrate how the two boards communicate with each other.
Use PCSEND.EXE on the PC console side at the command prompt if you do not have a
second board. PCSEND.EXE is located with source code in the
SAMPLES/LCD_Keypad/Windows directory.
TCP_RESPOND.C waits for a message from another single-board computer. The mes-
sage received is displayed on the LCD, and you may respond by pressing a key on the
keypad. The response is then sent to the remote single-board computer.
? TCPSEND.C —This program and TCP_RESPOND.C are executed on two separate sin-
gle-board computers to demonstrate how the two boards communicate with each other.
Use PCRESPOND.EXE on the PC console side at the command prompt if you do not
have a second board. PCRESPOND.EXE is located with source code in the
SAMPLES/LCD_Keypad/Windows directory.
When a key on the keypad is pressed, a message associated with that key is sent to a
specified destination address and port. The destination then responds to that message.
The response is displayed on the LCD.
Note that only the LEFT and UP scroll keys are set up to cause a message to be sent.
When using TCPSEND.C and TCP_RESPOND.C , connect the CPU Card and the other
single-board computer to an Ethernet. If you connect the them directly, be sure to use a
crossover Ethernet cable; straight-through Ethernet cables and a hub may be used instead.
56
Smart Star (SR9000)
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
101-0545 PROTOTYPING BOARD FOR LP3500
101-0563 RCM3400 PROTO BOARD
101-0589 CLONING BOARD RABBIT
101-0688 CARD D/A EXPANSION RN1300
101-0954 KIT DEV RABBIT RCM3360/3370 INTL
101-1050-BE-00025 ADPT USB 2 A FEMALE-2 5PIN .25M
10112627-101LF MINI-SAS HD 1X2 EXT PCB
10112628-101LF MINI-SAS HD 1X4 EXT PCB
相关代理商/技术参数
101-0507 功能描述:模块化系统 - SOM RCM3000 RABBITCORE RoHS:否 制造商:Digi International 外观尺寸:ConnectCore 9P 处理器类型:ARM926EJ-S 频率:150 MHz 存储容量:8 MB, 16 MB 存储类型:NOR Flash, SDRAM 接口类型:I2C, SPI, UART 工作电源电压:3.3 V 最大工作温度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
101-0508 功能描述:模块化系统 - SOM RCM3010 RABBITCORE RoHS:否 制造商:Digi International 外观尺寸:ConnectCore 9P 处理器类型:ARM926EJ-S 频率:150 MHz 存储容量:8 MB, 16 MB 存储类型:NOR Flash, SDRAM 接口类型:I2C, SPI, UART 工作电源电压:3.3 V 最大工作温度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
101050-9 制造商:RUKO 功能描述:Bulk 制造商:RUKO 功能描述:STEP DRILL 4-12MMX1MM 制造商:RUKO 功能描述:STEP DRILL, 4-12MMX1MM 制造商:RUKO 功能描述:STEP DRILL, 4-12MMX1MM; Drill Bit Size Metric:4mm; Overall Length:65mm; SVHC:No SVHC (19-Dec-2012); Drill Bit Type:Step; Drill Point Diameter:4mm; Material:HSS; Range:4mm - 12mm; Shank Dia:6mm; Step:1mm ;RoHS Compliant: NA
101050BO 制造商:TE Connectivity 功能描述:
101051 制造商:RUKO 功能描述:STEP DRILL 4-20MMX2MM 制造商:RUKO 功能描述:STEP DRILL, 4-20MMX2MM 制造商:RUKO 功能描述:STEP DRILL, 4-20MMX2MM; Drill Bit Size Metric:4mm; Overall Length:75mm; SVHC:No SVHC (19-Dec-2012); Drill Bit Type:Step; Drill Point Diameter:4mm; Material:HSS; Range:4mm - 20mm; Shank Dia:8mm; Step:2mm ;RoHS Compliant: NA
10-105108-03G 制造商:Amphenol Aerospace 功能描述:10-105108-03G
10-105108-03P 制造商:Amphenol Aerospace 功能描述:10-105108-03P
10-105108-04P 制造商:Amphenol Aerospace 功能描述:10-105108-04P